field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

U.S. Renal Care

Dialysis Biomedical Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician - PCT Chronic In-center

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician

Let your Career take Flight. We are now hiring a Quality Tech to join our Winsted, CT team. SUMMARY The Quality Tech is responsible for providing technician support to the following: production and systems quality, administrative systems of certified operator/inspector program, inspection and all internal special processes (except FPI) within the Winsted operation. ESSENTIAL FUNCTIONS <ul><li>Initiate / source inspection / product release and may review customer purchase orders and specifications as applicable for compliance as part of DSQR/Product Release Agent.</li><li>Administer the certified operator/inspector program, including training, testing and auditing.</li><li>Investigate and document certified operator findings and issue appropriate corrective action/written reports.</li><li>Maintains drawing and specifications for the Winsted plant. Maintains record retention files and area all quality records for the plant.</li><li>Maintains document revision history, including archive database.</li><li>Inputs MRB data entry.</li><li>May provide training on variety of quality issues/programs.</li><li>Disposition and submit MRB parts.</li><li>Support administration responsibilities of RMD data entry as needed.</li><li>Support Data Myte / SPC collection issues as needed.</li><li>Support administration responsibilities of master shop floor router changes as needed.</li><li>Support administration responsibilities of drafting department (operation sheet instructions) (off shift)</li><li>as needed.</li><li>Follow policies and procedures as outlined in Employee Handbook.</li><li>Perform all other job duties as assigned.</li></ul> JOB RESPONSIBILITIES <ul><li>Actively participates, promotes and complies with all EHS programs and policies.</li><li>Must maintain Final Inspector status.</li><li>Conduct internal audits.</li><li>Support administration responsibilities within the Central Quality department as needed.</li><li>May interface with customers and supplies.</li><li>Witness welder qualification part submittals and perform weld visual inspections.</li><li>Report to MFG staff periodically on quality measures.</li><li>Perform other duties as required to meet business needs.</li><li>Provide support to shop floor production as needed.</li><li>Familiarity and compliance with corporate and plant protocols including EHS, SOX, Ethics of Business&nbsp;</li><li>Conduct, ABS, ASAT, ISO and export control.</li></ul> The products we manufacture are used in important industries.&nbsp; Transporting goods and people; the defense of our country; critical energy infrastructure for hospitals and public safety.&nbsp; Livelihoods and lives depend upon the products we manufacture.&nbsp; What we do as an organization is important and the first, and best, “line of defense” against non-conforming products escaping to our customers is you.&nbsp; A simple message: don’t take it, don’t make it, and don’t pass it. Apply today and let your journey begin as a Quality Tech. EDUCATION High school diploma, quality auditor certification a plus. <ul><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Quality Technician

<h4>Introduction</h4> Are you passionate about shaping the future of transportation in Connecticut? If so, come join our great team of engineering professionals and make an impact! Current students who will be graduating with a Bachelor's degree in Engineering by the end of May 2025 are strongly encouraged to apply! The State of Connecticut, Department of Transportation (DOT), is now accepting applications for Transportation Engineer Trainee positions at the DOT headquarters in Newington, CT!&nbsp; Transportation Engineer Trainees work in many different capacities agency-wide. Positions are available throughout the&nbsp;Bureau of Engineering and Construction. WHAT WE CAN OFFER YOU <ul><li>Visit our&nbsp;new&nbsp;State Employee Benefits Overview&nbsp;page!</li><li>The opportunity to work for a Forbes top company -&nbsp;'Forbes':&nbsp;State of Connecticut Ranked One of the Best Employers of 2023&nbsp;- State of CT Receives National Recognition for Offering Job Growth, Competitive Benefits, and Flexible Schedule</li><li>Professional growth and development opportunities</li><li>A healthy&nbsp;work/life balance&nbsp;to all employees</li><li>Join an award winning agency! CTDOT has been recently awarded the Employer of the Year award by the Connecticut Society of Civil Engineers (CSCE) and named the Women’s Transportation Seminar (WTS) CT Employer of the Year for 2024!</li></ul> POSITION HIGHLIGHTS <ul><li>Monday through Friday</li><li>Full-time (40 hours per week)</li><li>Location:&nbsp; Positions available at the DOT headquarters in Newington, CT</li><li>Applicants must be available to travel for training, conferences, meetings, field reviews, etc.</li><li>A valid motor vehicle operator's license is required and must be maintained.</li><li>This position is eligible to apply for telework after successful completion of the working test period, and thereafter, in accordance with the Telework Policy which can be found here. Employees in their initial working test period must work on site in the office.</li></ul> DISCOVER THE OPPORTUNITY TO <ul><li>Problem solve, recommend and implement effective solutions in a timely manner;</li><li>Contribute to providing safe and efficient transportation improvements for the traveling public;</li><li>Utilize computer aided design software (MicroStation) and other applications such as Microsoft Word and Excel;</li><li>Read and analyze or prepare construction plans and estimates.</li></ul>The successful candidate will have experience with: <ul><li>Utilizing engineering-related computer software;</li><li>Working as part of a team;</li><li>Providing verbal and written communication to a diverse population, including presentation skills;</li><li>Using Microsoft Excel, Microsoft Word, Microsoft Project, and Microsoft Access;</li><li>Multitasking and managing large workloads.</li></ul> *SALARY/PROMOTIONAL OPPORTUNITY Promotional Opportunity Salary Transportation Engineer Trainee $72,629/annually After successful completion of a one (1) year training program, you will be promoted to Transportation Engineer 1 (Engineering) $81,047-$99,673/annually After successful completion of two (2) years as a Transportation Engineer 1 (Engineering), you will be promoted to Transportation Engineer 2 (Engineering) $91,244-$117,842/annually APPLICATION DETAILSPlease list your Driver's license number, expiration date, and issuing State, Engineer in Training license number (if applicable) and any other job-relevant licenses or certifications you hold, in the Licenses and Professional Certifications section of your application. ABOUT US The mission of the DOT is to provide a safe and efficient intermodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. To learn more about our mission, vision and values, please click here. Visit our website to learn more about the Connecticut DOT! Watch the video below to learn what Transportation Engineers do at the Connecticut DOT! <h4>Selection Plan</h4> <ul><li>For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other.</li></ul> To Apply: <ul><li>In order to be considered for this job opening, you must meet the Minimum Qualifications as listed on this job opening. You must specify your qualifications on your application.</li><li>The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified.</li><li>Ensure that your application is complete and detailed before submitting it. In order to comply with Public Act 21-69, the State of Connecticut is no longer asking for resumes during the initial application process. You will not be able to make revisions once your application is submitted into the JobAps system.</li><li>Please select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>In order to receive educational credits toward qualification for this job posting, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the Talent Acquisition Professional listed on this job posting. </li><li>All application materials must be received by the recruiting agency by the time specified on the job opening for the position for which you are applying. Late applications may not be submitted and will not be considered. Exceptions are rare and limited to documented events that incapacitate a candidate during the entire duration of the job posting time period. It is the candidate’s obligation and responsibility to request an exception and provide a legally recognized justification to accommodate such exception. Requests should be made to <a href="mailto:DAS.SHRM@ct.gov" target="_blank">DAS.SHRM@ct.gov</a>.</li></ul> FOR ASSISTANCE IN APPLYING: <ul><li>Please read or watch our Applicant Tips on How to Apply.</li></ul> Important Information After You Apply: <ul><li>This posting may require completion of additional referral questions (RQs). You can access these RQs via an email that will be sent to you after the posting's closing date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Your responses to these RQs must be submitted by the questionnaire's expiration date. Please regularly check your email and JobAps Personal Status Board for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam.</li><li>Read through this helpful link to prepare for your interview.</li><li>Although applicants will receive correspondence via email, as a backup they are also encouraged to sign on to their Personal Status Board on a daily basis to monitor their status, view all emailed notices and complete tasks required in the recruitment process.</li><li>Note: At any point during the recruitment process, applicants may be required to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring agency.</li><li>Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.</li><li>The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.</li><li>Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State Employees which is available at <a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>.</li></ul>Connect With Us: Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process. Updates will be available through your JobAps portal account. Should you have any questions pertaining to this recruitment, please contact Frank DeCusati at <a href="mailto:frank.decusati@ct.gov" target="_blank">frank.decusati@ct.gov</a>. <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and the Connecticut Airport Authority this class is accountable for receiving training in introductory professional engineering work for the development of technical and professional transportation engineering and transportation construction engineering skills and knowledge in order to qualify for advancement in the field of transportation engineering. <h4>EXAMPLES OF DUTIES</h4> In the Division of Highway Design, engineers have the challenge to not only improve Connecticut’s transportation system to meet operational and safety needs, but also to balance improvements against environmental, historic, cultural, community, aesthetic, and economic impacts. Engineers in the Division of Highway Design provide lead services in the development of projects that improve the safety, capacity, and efficiency of the State’s transportation system and find solutions to challenging roadway and multi-modal improvement problems. The State Design Unit consists of in-house highway design engineers who provide lead or support services in the development of capital projects. They develop design alternatives into contract plans, specifications, and construction estimates, provide technical guidance on elements such as roadway geometry, roadside safety, and highway drainage, and they also coordinate roadway improvements with stakeholders such as municipal leaders, neighborhood groups, businesses, and homeowners. The Consultant Design Unit is responsible for overseeing engineering consultant firms that assist the Department in designing larger complex projects. The Project Development Unit is responsible for identifying and scoping all transportation projects for the Division of Highway Design as well as managing all roadway related assets. Engineers in the Division of Bridges work with a variety of transportation structures. They provide lead or support services in the development of capital projects as well as inspection of in-service structures. They use advanced analysis software and CADD technology to prepare designs including geometrics, drainage, structural analysis including load ratings, creating bid documents for traffic and roadway structures, as well as bridge rehabilitations or replacements, and develop specifications and cost estimates. They administer projects from project concept, through design including coordinating permits, and coordinating with municipalities and utilities, then follow the project through to construction. During construction, they review contractor developed drawings to facilitate construction, ensure contract compliance and provide support to address construction complications. Bridge engineers also perform structure inspections assuring safety, capacity and efficiency of the State’s bridge infrastructure as well as carry out detailed geotechnical analysis and hydraulic analysis and review analysis done by outside parties. In addition, bridge engineers manage projects and programs designed by consultant firms. Engineers in the Division of Traffic Engineering conduct traffic engineering studies and perform traffic flow analyses. They also develop designs for traffic signal systems and traffic control signals and review major commercial developments for their effect on highway operations. The Traffic Safety Engineering unit works to prevent fatal and serious injury crashes. Traffic safety engineers work to implement new and innovative solutions proven to save lives and reduce serious injuries. The Division of Facilities and Transit consists of the Facilities Design, AEC Applications, Environmental Compliance, and Engineering Services (Pavement Design and Utilities Coordination) units. The Facilities Design Unit provides in-house and consultant engineering design and technical support services in the areas of Civil, Architectural, Structural, Mechanical and Electrical Engineering. The primary focus is the renovation or new construction of facilities that support the roadway, bridge, rail transit, and bus transit operations. These projects include highway maintenance and repair facilities, rail stations, rail maintenance facilities, track, signal and catenary for rail operations, bus maintenance facilities, parking garages, salt sheds and both above ground and underground storage tanks, electric vehicle charging stations and solar array fields. Engineers in AEC Applications are responsible for developing and establishing electronic design standards and computer applications development, support and training. Environmental Compliance provides technical support and regulatory guidance on matters related to hazardous wastes and regulated contaminated materials. Pavement Design engineers provide design and technical support for projects that span across Connecticut’s roughly 10,000 lane-mile roadway network. Engineers in Project Administration are the in-house team responsible for advising, monitoring and delivering the Capital Program. The Contract Development team oversees the development of contract documents and reviews plans and specifications for consistency, completeness and accuracy to ensure capital projects are suitable for advertising. The Cost Estimating team prepares final confidential cost estimates and evaluates bids received on Department advertised projects. The Asset Management team is responsible for implementing the Department’s Highway and Transit Asset Management Plans in regards to inventory, condition, lifecycle management, risk management, financial planning and investment strategies to maintain assets in a State of Good Repair, and is responsible for regularly monitoring asset performance metrics and financial investments. The Pavement Management team is responsible for compiling pavement condition information and proposing cost-effective treatment strategies to optimize investments in pavements. The Program and Project Management team supports the Chief Engineer’s office in Capital Program management oversight and project prioritization as well as the identification and tracking of risks to project delivery. The ADA Engineering Coordination team monitors and reports on the Department’s ADA compliance as it relates to activities within the public right-of-way. The CTDOT is mandated to convert the transit system in Connecticut to 100% electrification by 2035 and has an ambitious program to update and electrify all Transit facilities in the state of Connecticut. Positions may also be available in other program areas. Visit our website to learn more about the Connecticut DOT! <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Knowledge of basic transportation engineering theories, principles and methods;&nbsp;</li><li>Skill in use of drafting and calculating instruments and other computer applications;&nbsp;</li><li>Considerable ability in performing mathematical computations, making neat and accurate drawings and preparing minor design and structural details.</li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Possession of a Bachelor's degree. NOTE:&nbsp;If the target job classification has a Minimum Qualification that requires specific licensure and/or the Bachelor's degree to be in a specific area(s), then these specific licensures and degree areas are required for appointment to the Transportation Engineer Trainee classification.&nbsp;Candidates cannot be appointed until all degree requirements are complete. <h4>MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED</h4> <ul><li>Possession of Professional Engineer (PE) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li><li>Possession of Engineer-In-Training (EIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li></ul> <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Possession of a civil engineering degree for design-related position</li><li>Possession of an engineering degree in a position-relevant area for specialty positions (i.e., Electrical Engineering degree for position in Electrical Engineering)</li><li>3.0 or higher grade-point average in relevant engineering courses</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents in this class may be required to possess and retain a valid Motor Vehicle Operator’s license. </li><li>Incumbents in this class may be required to travel.</li></ul> <h4>WORKING CONDITIONS</h4> Incumbents in this class may be exposed to some risk of injury or physical harm from highway, construction site, or on-site environments and a moderate degree of discomfort from year-round weather conditions. <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

State of Connecticut

Transportation Engineer Trainee (40 Hour)(Engineering)

<h4>Introduction</h4> Are you passionate about shaping the future of transportation in Connecticut? &nbsp;If so, come join our great team of engineering and construction management professionals and make an impact! Current students who will be graduating with a Bachelor's degree in Engineering or Construction Management by the end of May 2025 are strongly encouraged to apply! The&nbsp;State of Connecticut,&nbsp;Department of Transportation&nbsp;(DOT), is now accepting applications for&nbsp;Transportation Engineer Trainee (Construction)&nbsp;positions in the&nbsp;Office of Construction&nbsp;in the&nbsp;Bureau of Engineering and Construction&nbsp;throughout the State! WHAT WE CAN OFFER YOU <ul><li>Visit our&nbsp;new&nbsp;State Employee Benefits Overview&nbsp;page!</li><li>The opportunity to work for a Forbes top company -&nbsp;'Forbes':&nbsp;State of Connecticut Ranked One of the Best Employers of 2023&nbsp;- State of CT Receives National Recognition for Offering Job Growth, Competitive Benefits, and Flexible Schedule</li><li>Professional growth and development opportunities</li><li>A healthy&nbsp;work/life balance&nbsp;to all employees</li><li>On-site low-cost fitness center, on-site cafeteria and Electric Vehicle (EV) charging&nbsp;at DOT HQ building</li><li>Ample free parking with easy access from major highways or by public transportation</li><li>Tuition reimbursement </li><li>Join an award winning agency! CTDOT has been recently awarded the&nbsp;Employer of the Year&nbsp;award by the&nbsp;Connecticut Society of Civil Engineers&nbsp;(CSCE) and named the&nbsp;Women’s Transportation Seminar&nbsp;(WTS) CT Employer of the Year for 2024!</li></ul> POSITION HIGHLIGHTS <ul><li>Monday through Friday</li><li>Full-time (40 hours per week)</li><li>Location: Positions available at the DOT Headquarters in Newington, and in District Offices throughout the State</li><li>Applicants must be available to travel for training, conferences, meetings, field reviews, etc.</li><li>A valid motor vehicle operator's license is required and must be maintained.</li><li>This position is eligible to apply for telework after successful completion of the working test period, and thereafter, in accordance with the Telework Policy which can be found&nbsp;here. Employees in their initial working test period must work on site in the office.</li></ul>THE ROLE Transportation Engineer Trainees work in many different capacities agency-wide. Transportation Engineer Trainee positions are available throughout the Bureau of Engineering and Construction. Incumbents will discover the opportunity to: <ul><li>Problem solve, recommend and implement effective solutions in a timely manner;</li><li>Contribute to providing safe and efficient transportation improvements for the traveling public;</li><li>Utilize computer aided design software (MicroStation) and other applications such as Microsoft Word and Excel;</li><li>Read and analyze or prepare construction plans and estimates.</li></ul> *SALARY/PROMOTIONAL OPPORTUNITY Promotional Opportunity Salary Transportation Engineer Trainee $72,629/annually After successful completion of a one (1) year training program, you will be promoted to Transportation Engineer 1 (Construction Engineering) $81,047-$99,673/annually After successful completion of two (2) years as a Transportation Engineer 1 (Construction Engineering), you will be promoted to Transportation Engineer 2 (Construction Engineering) $91,244-$117,842/annually APPLICATION DETAILS Please list your Driver's license number, expiration date, and issuing State, Engineer in Training license number (if applicable) and any other job-relevant licenses or certifications you hold, in the Licenses and Professional Certifications section of your application. ABOUT US The mission of the DOT is to provide a safe and efficient intermodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. To learn more about our mission, vision and values, please click&nbsp;here. Visit&nbsp;our website&nbsp;to learn more about the Connecticut DOT! Watch the video below to learn what Transportation Engineers do at the Connecticut DOT! <h4>Selection Plan</h4> <ul><li>For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other.</li></ul> To Apply: <ul><li>In order to be considered for this job opening, you must meet the Minimum Qualifications as listed on this job opening. You must specify your qualifications on your application.</li><li>The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified.</li><li>Ensure that your application is complete and detailed before submitting it. In order to comply with&nbsp;Public Act 21-69, the State of Connecticut is no longer asking for resumes during the initial application process. You will not be able to make revisions once your application is submitted into the JobAps system.</li><li>Please select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>In order to receive educational credits toward qualification for this job posting, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the Talent Acquisition Professional listed on this job posting. </li><li>All application materials must be received by the recruiting agency by the time specified on the job opening for the position for which you are applying. Late applications may not be submitted and will not be considered. Exceptions are rare and limited to documented events that incapacitate a candidate during the entire duration of the job posting time period. It is the candidate’s obligation and responsibility to request an exception and provide a legally recognized justification to accommodate such exception. Requests should be made to&nbsp;<a href="mailto:DAS.SHRM@ct.gov" target="_blank">DAS.SHRM@ct.gov</a>.</li></ul> FOR ASSISTANCE IN APPLYING: <ul><li>Please&nbsp;read&nbsp;or&nbsp;watch&nbsp;our Applicant Tips on How to Apply.</li></ul> Important Information After You Apply: <ul><li>This posting may require completion of additional referral questions (RQs). You can access these RQs via an email that will be sent to you after the posting's closing date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Your responses to these RQs must be submitted by the questionnaire's expiration date. Please regularly check your email and JobAps Personal Status Board for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam.</li><li>Read through this helpful link to&nbsp;prepare for your interview.</li><li>Although applicants will receive correspondence via email, as a backup they are also encouraged to sign on to their Personal Status Board on a daily basis to monitor their status, view all emailed notices and complete tasks required in the recruitment process.</li><li>Note: At any point during the recruitment process, applicants may be required to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring agency.</li><li>Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.</li><li>The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.</li><li>Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State Employees which is available at&nbsp;<a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>.</li></ul>Connect With Us: Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process. Updates will be available through your JobAps portal account. Should you have any questions pertaining to this recruitment, please contact Jasmyn Raymond at <a href="mailto:Jasmyn.Raymond@ct.gov" target="_blank">Jasmyn.Raymond@ct.gov</a>.&nbsp; <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and the Connecticut Airport Authority this class is accountable for receiving training in introductory professional engineering work for the development of technical and professional transportation engineering and transportation construction engineering skills and knowledge in order to qualify for advancement in the field of transportation engineering. <h4>EXAMPLES OF DUTIES</h4> Performs a wide variety of increasingly difficult duties as technical skills are acquired during course of training period. The Division of Construction Operations (DCO)&nbsp;administers construction and maintenance projects statewide from design to final acceptance. This office is involved with Alternative Project Delivery, Construction Claims &amp; Litigation, E-Construction, Materials Testing and Central Surveys. The Quality Assurance Unit is responsible for Work Zone Safety, Value Engineering, Records Examination, Constructability Plan Reviews, and Standard Specifications revisions. <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Knowledge of basic transportation engineering theories, principles and methods;&nbsp;</li><li>Skill in use of drafting and calculating instruments and other computer applications;&nbsp;</li><li>Considerable ability in performing mathematical computations, making neat and accurate drawings and preparing minor design and structural details.</li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Possession of a Bachelor's degree. NOTE:&nbsp;If the target job classification has a Minimum Qualification that requires specific licensure and/or the Bachelor's degree to be in a specific area(s), then these specific licensures and degree areas are required for appointment to the Transportation Engineer Trainee classification.&nbsp;Candidates cannot be appointed until all degree requirements are complete. <h4>MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED</h4> <ul><li>Possession of Professional Engineer (PE) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li><li>Possession of Engineer-In-Training (EIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li></ul> NOTE: The following additional substitutions are allowed for the Target Class of Transportation Engineer 1 (Construction Engineering): <ul><li>Possession of Land Surveyor (LS) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li><li>Possession of Land Surveyor-In-Training (LSIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302 may be substituted for the General Experience requirement.</li><li>Possession of at least Level III certification, from the National Institute for Certification in Engineering Technologies (NICET), in one of the following Civil Engineering Technology Programs may be substituted for the General Experience requirement: <ul><li>Transportation Construction Inspection Program - Highway Construction Inspection.</li><li>Construction Materials Testing Program - Asphalt or Concrete.</li><li>Transportation Program - Highway Materials, Highway Surveys or Highway Construction Inspection.</li></ul></li><li>Possession of a Level III Survey Technician Certification from the National Society of Professional Surveyors may be substituted for the General Experience requirement.</li><li>Possession of an American Welding Society (AWS) Certified Welding Inspector (CWI) certification, at the level of a Welding Inspector (WI) or above, may be substituted for the General Experience requirement.</li></ul> <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Experience in position-relevant engineering or construction management area</li><li>Experience utilizing engineering-related computer software and/or construction management software</li><li>Experience working collaboratively in a team to meet goals and objectives</li><li>Experience communicating technical information to peers, supervisors, and managers in person, both verbally and in writing using Microsoft Office Suite and SharePoint</li><li>Experience interpreting construction plans and specifications</li><li>Experience simultaneously tracking and prioritizing activities or projects while adhering to deadlines and producing deliverables</li><li>Completion of the Fundamentals of Engineering (FE) exam or Fundamentals of Surveying (FS) exam</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents in this class may be required to possess and retain a valid Motor Vehicle Operator’s license. </li><li>Incumbents in this class may be required to travel.</li></ul> <h4>WORKING CONDITIONS</h4> Incumbents in this class may be exposed to some risk of injury or physical harm from highway, construction site, or on-site environments and a moderate degree of discomfort from year-round weather conditions. <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

Transportation Engineer Trainee (Construction)

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!MANUFACTURINGRocket Lab’s Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware, and are responsible for delivering our projects and missions on time and on budget to our customers.PRODUCTION TECHNICIAN&nbsp;As a Production Technician based at Rocket Lab’s site in Auckland, you will have the opportunity to assemble high precision spacecraft components.&nbsp; In this role you will be hands on, working with tools, equipment and/or facilities to build or test Rocket Lab launch vehicles. To be successful in this role, you must be technically savvy with tools, a team player and be output driven to meet tight deadlines. Join a driven team that’s tackling challenging projects, delivering on exciting missions, and making an impact on the future of space!WHAT YOU’LL GET TO DO: The role’s responsibilities<ul><li>Precision assembly of mechanical hardware, sheet metals and basic testing componentry.</li><li>Cleaning of components of oxygen service to exacting standards. </li><li>Test components and systems using specific test equipment.</li><li>Share ideas to improve processes collectively as a team.</li></ul>YOU’LL BRING THESE QUALIFICATIONS: <ul><li>Preferable to demonstrate 1+ years of relevant industry experience.</li><li>Able to read, understand and follow manufacturing instructions. </li><li>Be able to manufacture components to a high workmanship standard, including riveting and precision assembly.</li><li>Comfortable working to exacting standards, including cleanliness for oxygen service.</li><li>Have a good level of eyesight and be able to inspect assemblies to a high workmanship standard.</li></ul>WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Production Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.&nbsp;COMPOSITE TECHNICIAN I-IVWe are currently seeking a Composite Technicians at several experience levels to join our team. Technicians will be based out of Rocket Lab's newest Space Structures Complex production facility in Middle River, MD. The Composite Technicians will be responsible for the build and assembly of Composite components used in the production of the Neutron Launch Vehicle structure.&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Assembly of structures including setup, bonding and fastener applications&nbsp;</li><li>Laminate assemblies by determining proper placement of composite materials&nbsp;</li><li>Prepare parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections&nbsp;</li><li>Vacuum bag processing, bonding, and oven/autoclave curing&nbsp;</li><li>Making basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches&nbsp;</li><li>Fitting of Honeycomb, foam and syntactic core&nbsp;&nbsp;</li><li>Fitting and refurbishment of thermal protection systems.&nbsp;&nbsp;</li><li>Integration of mechanical hardware&nbsp;&nbsp;&nbsp;</li><li>Perform other standard composite and integration building techniques and practices as industries such as aerospace, space and other composite workplaces demand.&nbsp;&nbsp;</li><li>You may be requested to work on other products for Rocket Lab in the local area or travel as required.&nbsp;</li></ul>Please Note: This requisition can be hired at a Technician Level I, II, III or IV.&nbsp;&nbsp;&nbsp;YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH I:&nbsp;&nbsp;<ul><li>Minimum 1+ years of experience in composite or lamination experience OR&nbsp;</li><li>2+ years of military equipment maintenance experience OR&nbsp;</li><li>2+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Basic Math Skills&nbsp;</li><li>Knowledge of the following tool use (or if no previous experience, open to training on):&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH II:&nbsp;&nbsp;<ul><li>Minimum 3+&nbsp; years of experience &nbsp;in composite or lamination experience OR&nbsp;</li><li>4+ years of military equipment maintenance experience OR&nbsp;</li><li>4+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in two composite work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Experience in the use of the following tools to achieve complex composite assemblies:&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH III:&nbsp;&nbsp;&nbsp;<ul><li>Minimum 6+&nbsp; years of experience &nbsp;in composite or lamination experience OR&nbsp;&nbsp;</li><li>7+ years of military equipment maintenance experience OR&nbsp;</li><li>7+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in all composite work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Significant on the job experience of the following tool use to achieve complex composite assemblies:&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH IV:&nbsp;&nbsp;&nbsp;<ul><li>Minimum 12+ years of experience in composite or lamination experience OR&nbsp;&nbsp;</li><li>13+ years of military equipment maintenance experience OR&nbsp;</li><li>13+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in all composites work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Experience training and mentoring newer composite technicians on industry standards and specific processes&nbsp;<ul><li>Expert knowledge of the following tool use and demonstrated capability to apply them to achieve complex composite assemblies:&nbsp;</li><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>These qualifications would be nice to have:&nbsp;&nbsp;<ul><li>Experienced in Core bond and Splicing&nbsp;</li><li>Broad Industry manufacturing experience from previous appointments&nbsp;</li><li>1+ years composite experience (aerospace industry experience preferred)&nbsp;</li><li>Advanced Prepreg manufacturing knowledge&nbsp;&nbsp;&nbsp;</li><li>Resin infusion knowledge&nbsp;&nbsp;&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite.Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (MD Only)$21.39—$44.23 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Composite Technician I-IV

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!BUILDING NEUTRON AT ROCKET LAB:Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.&nbsp; Rocket&nbsp;Lab’s&nbsp;Neutron&nbsp;team&nbsp;is&nbsp;responsible&nbsp;for&nbsp;bringing&nbsp;our&nbsp;new&nbsp;large&nbsp;rocket&nbsp;Neutron&nbsp;and&nbsp;its&nbsp;launch&nbsp;and&nbsp;test&nbsp;sites&nbsp;to&nbsp;life.&nbsp;From&nbsp;designing&nbsp;and&nbsp;testing&nbsp;Neutron’s&nbsp;structures&nbsp;and&nbsp;components, to&nbsp;firing&nbsp;up&nbsp;its&nbsp;new&nbsp;Archimedes&nbsp;engines, to&nbsp;setting&nbsp;up&nbsp;Neutron’s&nbsp;launch&nbsp;pads&nbsp;and&nbsp;test&nbsp;sites&nbsp;across&nbsp;the&nbsp;United&nbsp;States,&nbsp;joining&nbsp;the&nbsp;Neutron&nbsp;team&nbsp;is&nbsp;your&nbsp;opportunity&nbsp;to&nbsp;help&nbsp;launch&nbsp;a&nbsp;new&nbsp;large&nbsp;rocket&nbsp;for&nbsp;the&nbsp;very&nbsp;first&nbsp;time!&nbsp;WHAT YOU'LL GET TO DO:Your role will be focusing on, but not limited to the pressurised tanks, unpressurised sections and fairings on both the S2 and S1 structures of the neutron launch vehicle. This position requires a wide knowledge of composite manufacturing techniques, product knowledge and an openness to trialing new and exploratory methods of building.The position is tied into Research and Development, you will work closely with internal and external customers to action and deliver test campaigns components at various scales. A mindset based on cost reduction and the end goal of lean production is necessary. A clear understanding of timelines and estimating deliveries is essential to success in this role and key to the overall delivery of the wider project.The Neutron project is large in scope and scale, you will help mitigate handling and logistic issues that can arise utilizing your past experiences and problem-solving capability. It is essential that as a member of this team you can balance the line between quick development requirements and ensure the end state product specifications are obtainable. Future opportunities will develop as Neutron moves into production and the development of AIT facilities in both NZ and the US.Kindly note this is a full-time, permanent position for a fixed term of 18 months.YOU'LL BRING THESE QUALIFICATIONS:<ul><li>Top tier, advanced Prepreg manufacturing knowledge</li><li>Experienced in Core bond and Splicing</li><li>Resin infusion knowledge</li><li>Broad Industry manufacturing experience from previous appointments</li><li>Basic I.T. skills</li><li>Excellent communication skills, both verbal and written</li><li>3 + years industry experience</li></ul>If the above is of interest and you would like to know more apply now!WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Composite Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!BUILDING ELECTRON AT ROCKET LAB: Rocket Lab's Electron team is responsible for building, testing, and launching our Electron rocket across our launch sites and test facilities in the United States and New Zealand. Electron is one of the world's most frequently-launched rockets, and our team behind its success are diligent, move fast, and have each others' back to deliver a reliable rocket to the launch pad time and time again. WHAT YOU'LL GET TO DO: The Mechanical Production team work closely with test engineers and design engineers to achieve the highest product quality and safety standards for Rocket Lab launch vehicles. Mechanical assembly technicians receive components from supply chain and complete the assembly and testing of those components before passing on to the Integration team. As a Technician, you will be hands on, working with tools, equipment and/or facilities to build, launch or test Rocket Lab launch vehicles or components. Your responsibilities contribute to the overall production and launch schedule. YOU'LL BRING THESE QUALIFICATIONS:<ul><li>Trade qualified in relevant industry or must be able to demonstrate 4+ years of relevant industry experience</li><li>Precision mechanical assembly</li><li>Operation of mechanical, electrical and automated test equipment</li><li>Comfortable working to exacting standards, including cleanliness for oxygen service</li><li>Have a working understanding of standard industry ESD</li><li>Have a good level of eyesight and be able to inspect assemblies to a high workmanship standard</li><li>Be able to manufacture components to a high workmanship standard, including riveting and precision assembly</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Excellent communication skills, both verbal and written</li><li>The ability to work effectively in a team environment as well as autonomously</li><li>Able to read, understand and follow manufacturing instructions and drawings</li><li>A high work ethic, always seeking more responsibility. Able to work long hours if required</li><li>Takes initiative</li><li>Remains calm under pressure</li><li>Computer literate, and comfortable using smartphones and tablets</li></ul>This role will be 40 hrs/wk; 4 days per week on either day or evening shift.&nbsp;If the above sounds like you&nbsp;apply&nbsp;now!WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

961 Technician Jobs